Battery Pack Spacer + Laser Template Generator

Pack settings

Cell sizes are starting values; measure your actual cells including insulation.

Defaults: 3.6 V nominal / 4.2 V full for typical Li-ion cells. Check your cell datasheet and chemistry.

Cell locating features

Optional intermediate series busbar tabs (BMS / voltage sensing)

Default +1.0 mm: enlarges the rounded metal outline around the cell terminals. Maximum radius is limited to 0.5 mm inside the nominal cell edge. Inspect adjacent sheet gaps before cutting.

Metal cutting / welding relief

True circular cell-centred arcs. Default 7 mm for pronounced curves. Set 0 for straight edges.

1.0 = normal. Higher values deepen the circular arcs; geometry still requires electrical clearance checks.

Shrinks each metal sheet outline inward without moving the cells or changing the spacer STL. Default 2 mm. Check weldable terminal area and busbar neck widths after increasing.

12S10P — 120 cells

244.5 × 245.094 mm

Approximate spacer footprint. Physical layout: 12 rows × 10 columns.

Nominal pack voltage
43.2 V
Fully charged pack voltage
50.4 V

Based on 12 series groups × 3.6 V nominal / 4.2 V fully charged per cell. Parallel cells (10P) do not increase voltage. Actual voltage varies with cell chemistry, charge level and load.

Interactive 3D assembly preview

Drag to rotate · wheel to zoom · right-drag to pan · click a view button. This is an assembly visualization; spacers have 3D thickness with simplified shoulder and centering-tab details; the metal surfaces use the actual SVG cut outlines. The downloaded STL remains authoritative.

eFoil Almere
Loading 3D viewer…

TOP metal outlines

BOTTOM metal outlines

Both previews: metal outlines in red, optional weld-relief slits in blue, cell references in gray. Gray reference lines are NOT cutting lines. Bottom uses the same XY coordinates as top (not mirrored).

⬇ Download complete pack (ZIP)

One download containing TOP + BOTTOM spacer STL, metal SVG, polarity SVG, polarity PDF and README.

Print the two different STL files as supplied. The BOTTOM spacer is mirrored in X for a physical flip around the Y axis when installing it. This makes its cell holes line up in a staggered layout and places the locating shoulder toward the cells. Do not apply another mirror in your slicer. Check the fit and shoulder direction with a small test print before assembling cells. The 3D viewer approximates spacer walls, shoulders and tabs but does not reproduce the exact STL mesh or mirrored print orientation.

Polarity convention: G1 has + facing TOP; G2 has − facing TOP; groups alternate. BOTTOM is always the opposite. Bottom guide uses the same XY coordinates as TOP, viewed through the pack, not mirrored for a physical flip.

Safety and fabrication: The full-row B+ and B− collectors are geometric extensions, not verified current-sharing designs. Optional intermediate busbar tabs are geometric attachment points only; they DO NOT define or validate series wiring. Verify tab-to-tab connection mapping, insulation and clearance before cutting. The optional slits are illustrative straight relief cuts, not a verified copy of the supplied DXF. Additional clearance shrinks the metal footprint and can reduce current-carrying cross-section. The SVG is a preliminary interconnect outline, not a validated wiring or welding design. Confirm the illustrative alternating cell polarity convention (group 1 + on top), actual weld points, metal material/thickness, current capacity, fuse strategy, clearances, insulation and terminal location. Each SVG contains a REFERENCE_ONLY_DO_NOT_CUT layer: disable/delete that layer before cutting. Bottom geometry is in the SAME XY reference as the top; mirror only if your physical fabrication workflow requires it. A hobby laser may not cut copper or nickel. Never weld directly to cells without appropriate equipment and training.

Electrical convention: Group 1 negative full-width collector is on the bottom face, outer first-row edge. Final group positive full-width collector is on the bottom face, outer final-row edge. Top links groups 1–2, 3–4, etc.; bottom links groups 2–3, 4–5, etc. Cell orientation alternates by group. Continuous full-row collectors are integrated into the terminal metal outlines. Check current distribution, collector cross-section and cable connection placement.

Design checks (beta)

Checks the generated metal contours for cell-centre coverage and same-face metal-to-metal clearance. This is a geometry screening tool, not electrical, weld, thermal or insulation certification.

Minimum outline separation: 1 mm (adjust in Pack settings)

Limited geometry checks passed. This does NOT mean the battery pack is safe or validated.

TOP: 6 separate metal pieces · BOTTOM: 7 separate metal pieces

  • Expected series chain: G1 → G2 → … → G12 (12S10P).
  • Expected main terminals: B− on BOTTOM G1; B+ on BOTTOM G12.
  • Polarity pattern: G1 + on TOP, alternating by group; opposite on BOTTOM.
  • Every cell centre must belong to exactly one metal piece on each face.
  • Metal pieces on the same face must have at least 1 mm outline separation.
  • No errors found in the limited centre-coverage and same-face outline-clearance checks.

Not checked: actual series wiring through tabs/cables, weld position and quality, current sharing, narrow-neck ampacity, cell-can shorts, insulation thickness, laser kerf, tolerances, fuse design or thermal behaviour. Review top/bottom face orientation before assembly.

Need nickel strip? Order nickel strips at BatteryNickelStrip.com ↗ (external supplier; check material, dimensions and suitability before ordering)

Busbar material & current calculator

Compare electrical resistance and resistive heating for a simplified straight metal strip. This is NOT an ampacity rating or a validation of the actual laser-cut outlines, welds, current paths, or cell connections.

Resistance
—
Voltage drop
—
Resistive heat
—
Current density
—

Thickness comparison at the selected current

Thickness (mm)Resistance (mΩ)Voltage drop (mV)Heat (W)

Important: These are room-temperature DC estimates using R = ρL/(width × thickness) and P = I²R. They assume a uniform straight strip carrying the entire selected current. Real busbars branch, share current unevenly, have narrow necks, weld/contact resistance, temperature-dependent resistivity, and variable cooling. The calculator does not determine a safe thickness or maximum continuous current. Use measured minimum effective widths, verify welds and perform electrical/thermal engineering checks before manufacturing a battery pack.
💡 Smart Layout Suggestions (experimental — click to open)
⚠ Thinking outside the box — experimental battery layouts

Irregular cell arrangements and custom busbars go beyond the standard patterns supported by this generator. A shape that fits is not a verified battery design. Do not cut, weld, assemble or energize a suggested layout without an independently reviewed electrical schematic, polarity map, insulation plan and thermal/current assessment. Custom metal and spacer manufacturing exports remain disabled until the necessary checks are implemented and tested.

Find geometrical cell arrangements for the selected 12S10P pack within a maximum width and length. Optionally draw an irregular compartment boundary. This tool proposes abstract series/parallel groups and checks their counts and chain connectivity. It does not validate actual TOP/BOTTOM terminal polarity, busbars, short circuits or safe metal outlines. Your existing production downloads remain based on the normal layout above.

Enter dimensions and generate suggestions.

Design limitation: A cell fitting inside the boundary does not mean its spacer, insulation, wiring, thermal behaviour or metal strips are safe. Suggested patterns are geometry-only concepts, not electrical designs or cutting templates. No custom-layout manufacturing export is provided. You may save candidate coordinates and a proposed abstract S×P connection graph and polarity concept as JSON; it is not a wiring diagram or fabrication drawing.